24V parking fuel heater igniter
Car heater igniter, also known as Operating altitudefuel heater igniter, is mainly used to preheat the engine in winter, so that the car can be ignited normally after the engine is heated. This fuel heater igniter input voltage of 24V, can instantly spark, ignite diesel, gasoline and other combustible materials, high power ignition, can melt copper wire, can resist 20m/s wind speed without affecting the arc.
Product Introduction
car heater igniter, also known as Operating altitudefuel heater igniter, is mainly used to preheat the engine in winter, so that the car can be ignited normally after the engine is heated. This fuel heater igniter input voltage of 24V, can instantly spark, ignite diesel, gasoline and other combustible materials, high power ignition, can melt copper wire, can resist 20m/s wind speed without affecting the arc.
Product parameters
|
product model |
TW-G-DH-ZC01 |
|
Trade name |
24V car fuel igniter |
|
product size |
L82.5mm×w77.5mm×H52.5mm |
|
input voltage |
24V |
|
output voltage |
15KV |
|
Ignition distance |
3-8mm |
|
Weight |
375g |
|
Input Current |
1.4A |
|
The input line length |
300mm |
|
Input wire diameter |
Φ1.8 |
|
Epoxy curing mode |
High temperature curing |
|
Product operating temperature |
-15℃~55℃ |
|
atmospheric pressure |
86kpa~106kpa |
|
Operating altitude |
＜3000m |
|
remark |
The above parameters are manual/instrument measurement, there will be 10% error, please understand |
Application Area
Parking fuel heater igniter can be used in fuel heaters, fuel electronic ignition, fuel/gas heating equipment, etc.
Product Adcantaged:
Car fuel igniter product advantages:
1. High-power ignition, high ignition efficiency, instantly ignite all kinds of fuel, ignition energy can melt copper wire.
2. Stable operation, resistance to 20m/s wind speed arc is not affected, even in harsh environment can also work normally.
3. Vacuum epoxy resin package, can work in high/low/wet environment, resin package can well protect the internal components, even under strong impact will not damage the internal circuit.
4. Use high voltage copper wire with good conductivity, high power transmission efficiency, low loss, copper wire outer with high strength insulation skin, not easy to aging, not easy to pull off, no electricity leakage.
RFQ :
1. Q: Can the product be customized?
A: High voltage generator, igniter products are supported to figure/sample/to parameter customization, customization needs can contact customer service
2. Q: Are there any points for attention when using the product?
A: Do not touch the ignition pin or electric arc when the product is working. Please pay attention to not placing inflammable objects around the experiment. If necessary, you can prepare fire protection items to avoid fire.
